Garmin
Fusion® Signature Series Marine Amplifiers, Signature Series 4 Channel 1400-Watt Marine Amplifier
Couldn't load pickup availability
Warranty Details
Warranty Details
Fusion® Signature Series Marine Amplifiers, Signature Series 4 Channel 1400-Watt Marine Amplifier
EXPERIENCE THE POWER OF MUSIC
Purpose-built for the marine environment, the Signature Series marine amplifiers feature some of the most impressive environmental protection available — delivering a Signature performance out on the water.
Class-D amplifier design delivers higher efficiency and greater output.
Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.
Conformal coated PCBs provide extra protection from the marine elements.
Rigid aluminium alloy heat sink is moulded for greater dissipation of heat.
The amplifiers are available in monoblock, 4-channel, 5-channel, 6-channel and 8-channel configurations.
Engineered to last season after season, the amplifiers include a supported 3-year warranty.
DESIGNED AND ENGINEERED TO TRUE-MARINE™ STANDARDS
Built on the True-Marine design philosophy from Fusion®, the Signature Series amplifiers have been tested to a high level of protection against salt fog, temperature, vibration and UV.
CLASS-D AMPLIFIER TECHNOLOGY
The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for a whole new level of audio performance.
SUPERIOR SYSTEM PERFORMANCE
The Signature Series amplifiers feature built-in variable bass boost, a subsonic filter and variable low/high pass crossover filters for superior performance and enhanced system protection.
World-class design and engineering.
MARINE-READY DESIGN WITH CONFORMAL COATED PCBS
Helping to extend the life of your amplifiers, the Signature Series amplifiers are designed with conformal coated PCBs to provide extra protection from the marine elements.
RIGID ALUMINUM ALLOY HEAT SINK
For increased efficiency, the rigid aluminium alloy heat sink is moulded to form a singular die-cast chassis. The fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation.
STAINLESS-STEEL MIRROR FINISH
The polished stainless-steel control panel cover conceals and helps protect all cable connections and settings controls while providing an attractive finish to complement any installation.
Multiple configurations to suit all your audio needs.
2,250-WATT MONOBLOCK AMPLIFIER
The Signature Series 2,250-watt monoblock amplifier is specifically designed to power a subwoofer. The amplifier is configurable for 1-ohm impedance for extra power.
1,400-WATT 4-CHANNEL AMPLIFIER
The Signature Series 1,400-watt 4-channel amplifier can power up to a maximum of four pairs of speakers or two pairs of speakers and one subwoofer.
1,600-WATT 5-CHANNEL AMPLIFIER
The Signature Series 1,600-watt 5-channel amplifier can power up to a maximum of four pairs of speakers and one subwoofer.
1,500-WATT 6-CHANNEL AMPLIFIER
The Signature Series 1,500-watt 6-channel amplifier can power up to a maximum of six pairs of speakers or four pairs of speakers and one subwoofer.
2,000-WATT 8-CHANNEL AMPLIFIER
The Signature Series 2,000-watt 8-channel amplifier can power up to a maximum of eight pairs of speakers or four pairs of speakers and two subwoofers.
Specs:
General |
|
| Channels | Monoblock/4/5/6/8 |
|---|---|
| Physical dimensions (Height) | 210 mm (8.27") |
| Physical dimensions (Width) | Monoblock/4/5-Channel: 300 mm (11.81") 6/8-Channel: 420 mm (16.54") |
| Physical dimensions (Depth) | Monoblock/4/5-Channel: 50 mm (1.97") 6/8-Channel: 57 mm (2.24") |
| Weight | Monoblock: 3.8 kg (8.38 lbs) 4-Channel: 3.53 kg (7.77 lbs) 5-Channel: 3.6 kg (7.94 lbs) 6-Channel/6-Channel (24 V): 5.3 kg (11.68 lbs) 8-Channel: 5.6 kg (12.35 lbs) |
| Operating temperature range | 0° to 50° C (32° to 122° F) |
| Warranty | 3 years |
| Operating voltage | Monoblock/4/5/6/8-Channel: 10.8-16 VDC 6-Channel (24 V): 21.6-32 VDC |
Audio |
|
| Amplifier class | Class D |
|---|---|
| Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD) | Monoblock: 500 W x 1 4-Channel: 150 W x 4 5-Channel: Main: 80 W x 4/Sub: 250 W x 1 6-Channel: 100 W x 6 8-Channel: 100 W x 8 |
| Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD) | Monoblock: 850 W x 1 4-Channel: 220 W x 4 5-Channel: Main: 130 W x 4/Sub: 330 W x 1 6-Channel: 140 W x 6 8-Channel: 140 W x 8 |
| Rated continuous (RMS) power (28.8 V input @ 4 Ohm < 1% THD) | 6-Channel (24 V): 100 W x 6 |
| Rated continuous (RMS) power (28.8 V input @ 2 Ohm < 1% THD) | 6-Channel (24 V): 140 W x 6 |
| Frequency response (+0, -1dB) | Monoblock: 10 Hz-320 Hz (-3 dB, dB @ 4 Ohm rated power) - subwoofer only 4/5-Channel: 10 Hz-50 kHz (-3 dB, dB @ 4 Ohm rated power) 6/8-Channel and 24-Volt 6-Channel: 10 Hz-40 kHz (-3 dB, dB @ 4 Ohm rated power) |
| Input sensitivity @ RCA inputs | 0.3 V-8 V RMS (user adjustable) |
| Input voltage range @ RCA inputs | 0.3 V-8 V RMS (user adjustable) |
| Input impedance | Monoblock/5-Channel: 4 kΩ nominal 4/6/8-Channel and 24-Volt 6-Channel: 7 kΩ nominal |
| Current consumption (Standby) | Monoblock/4/5/6/8-Channel: < 1 mA @ 14.4 V input 6-Channel (24 V): < 1 mA @ 28.8 V input |
| Current consumption (Idle) | Monoblock/4/5/6/8-Channel: < 2.5 A @ 14.4 V input 6-Channel (24 V): < 1.25 A @ 28.8 V input |
| Current consumption (Max) | Monoblock: 120 A 4/5-Channel: 80 A 6-Channel: 75 A 8-Channel: 100 A 6-Channel (24 V): 35 A |
| Fuse rating | Monoblock/6-Channel: 3 x 40 A ATC blade-type (SAE J1171 compliant) 4/5-Channel: 2 x 40 A ATC blade-type (SAE J1171 compliant) 8-Channel: 4 x 40 A ATC blade-type (SAE J1171 compliant) 6-Channel (24 V): 3 x 20 A ATC blade-type (SAE J1171 compliant) |
| Min. copper power/Ground wire gauge | 1 |
Signal Processing |
|
| High-pass/Low-pass full range filter | yes (user selectable) |
|---|---|
| HP variable crossover frequency range | Monoblock: 10 Hz-80 Hz 4/5/6/8-Channel and 24-Volt 6-Channel: 32 Hz-320 Hz |
| LP variable crossover frequency range | Monoblock: 32 Hz-320 Hz 4/5/6/8-Channel and 24-Volt 6-Channel: 32 Hz-320 Hz |
| Bass boost | 0 dB-9 dB, user adjustable (zone 3 only) |
In the box:
- Four 8-gauge, self-tapping screws
- 3 mm hex key (for the top cover and power terminals)
- 2.5 mm hex key (for the speaker terminals)
- Polishing cloth
- Spare J1171 compliant 40 A blade-type fuses
Become A Trade Partner
We pride ourselves on transparency and a doors-wide-open type of attitude. If you’re looking to get into the marine battery world, we’re here for you. Anyone can sign up to become a trade partner with us for free and get discounts applied right away.
Join trade Now
-
Reliability
Our customers can trust us to deliver on the promises we make. Using practical knowledge from 15 years of experience in the industry, we’ll recommend products that we know won’t fail you when you need them most.
-
Integrity
We want to provide all our customers with quality products for great prices, while always being honest and transparent with what products fit their vision, big or small.
-
Passion
As experts in our field, with years of hands-on experience, we know batteries like the back of our hands. When you come to MarineBatteryCo. we’ll use that knowledge to your advantage.
Who We Are
With 15 years in the marine industry, and 10 years running our own company, we know batteries and what you’ll need for your goals. With us, you’ll get quality and good value for your money. Our aim is to always deliver on our promises, and never promise more than we can. We’ll tell you the truth, whether it goes above or below your budget. Learn more about Thomas and MarineBatteryCo. here.
